GNUTTI FMF-9-125: CNC - GNUTTI MODEL FMF-9-125 AUTOMATIC ROTOCYCLE

STOCK #101436      

SPECIFICATIONS:

Rotary Boring Reaming Tapping and Threading Machine
SPECIFICATIONS:
(3) Tapping Heads M.D. 5/3 HP. 2-Speed, 3 Phase, 60 Cycle 440 Volt
(6) Drill Heads M.D. 5/3 HP. 2-Speed, 3 Phase, 60 Cycle 440 Volt
(1) Bar Cutter and Loader
(1) Chip Conveyor
Complete Free Standing Electical Control Cabinet with Individual 
Controls for the following:
     Left Front Spindle (Left Reamer)
     Upper Center (Not Used/Empty Station)
     Right Front Spindle (Right Reamer)
     Left Rear Spindle (Left Spot Facer)
     Left Middle Spindle (Left Thru Drill)
     Top Spindle (Ballseat Drill)
     Lower Center (Not Used/Empty Station)
     Right Rear Spindle (Right Spot Facer)
     Right Middle Spindle (Right Thru Drill)

EQUIPPED WITH, Oil Pneumatic Driven 8-Station Turret Transfer System. 
For Work with Rack and Pinion Drive and Positive Lock/Locator Systems.
 The Machine is Designed to Accommodate a Total of Nine Working 
Spindles. There are Presently Seven Working Spindles on the Machine as
 Described Above. Machine Mounted Operator Control Station for 
Automatic Cycle. Semi-Automatic Cycle, Manual Cycle, Power On, Speed, 
Turret Indexing, Locked Turret, Units Feed In, Units Feed Out, Stop 
and Feed Out, Chuck Opening, Brake Release, Chip Conveyor, Coolant 
Pump, Machine Mounted Dual Palm Buttons for Cycle Stan. Machine 
Mounted E-Stop, Jorgensen 12" Wide Motor Driven Slat Type Chip 
Conveyor. M.D. Coolant System. Work Light. Manuals and Drawings.

Spindle Stroke 5"
Rapid Feed Rate (In/Out) 300 IPM
Working Feed Rate 0 - 80 IPM
Spindle Nose IS040
Condition: Good



PRICE....................: ${please call for price}

View picture: View #1 View picture: View #2 View picture: View #3 View picture: View #4 View picture: View #5 View picture: View #6 View picture: View #7 View picture: View #8 View picture: View #9 View picture: View #10 Main Equipment Index CNC Index Gnutti Index TRANSFER MACHINES, ROTARY, TRUNION (HOR.& VERT.) Index Financing 1. PRICES are as is, where is, unless otherwise noted. Prices are exclusive of any and all State, Country, or Federal taxes. Any taxes shall be paid by the buyer in addition to the quoted purchase price. 2. TERMS are cash with order unless otherwise arranged. Title to the machine or machines does not pass to the buyer until it is paid for in full. All quotations are subject to prior sale and change without notice. 3. SHIPMENTS: Dates of delivery are determined from the date of our acceptance of any order or orders by the buyer and see estimates of approximate dates of delivery, not a guarantee of a particular day or delivery. 4. There are no provisions with respect to this quotation which are not specified herin. If buyer places an order with us based on this quotation, whether in writing or orally, then this quotation will consitute the entire contract between the buyer and us with respect to subject matter of this quotation. Any agreement so made shall be governed by the law of the State of Michigan. 5. Information is obtained from sources deemed reliable, however, we urge your inspection of this equipment to confirm any pertinent specifications prior to your purchase. We will not be responsible for any typographical errors or ommissions.		STOCK #101436 SPECIFICATIONS: Rotary Boring Reaming Tapping and Threading Machine SPECIFICATIONS: (3) Tapping Heads M.D. 5/3 HP. 2-Speed, 3 Phase, 60 Cycle 440 Volt (6) Drill Heads M.D. 5/3 HP. 2-Speed, 3 Phase, 60 Cycle 440 Volt (1) Bar Cutter and Loader (1) Chip Conveyor Complete Free Standing Electical Control Cabinet with Individual Controls for the following: Left Front Spindle (Left Reamer) Upper Center (Not Used/Empty Station) Right Front Spindle (Right Reamer) Left Rear Spindle (Left Spot Facer) Left Middle Spindle (Left Thru Drill) Top Spindle (Ballseat Drill) Lower Center (Not Used/Empty Station) Right Rear Spindle (Right Spot Facer) Right Middle Spindle (Right Thru Drill) EQUIPPED WITH, Oil Pneumatic Driven 8-Station Turret Transfer System. For Work with Rack and Pinion Drive and Positive Lock/Locator Systems. The Machine is Designed to Accommodate a Total of Nine Working Spindles. There are Presently Seven Working Spindles on the Machine as Described Above. Machine Mounted Operator Control Station for Automatic Cycle. Semi-Automatic Cycle, Manual Cycle, Power On, Speed, Turret Indexing, Locked Turret, Units Feed In, Units Feed Out, Stop and Feed Out, Chuck Opening, Brake Release, Chip Conveyor, Coolant Pump, Machine Mounted Dual Palm Buttons for Cycle Stan. Machine Mounted E-Stop, Jorgensen 12" Wide Motor Driven Slat Type Chip Conveyor. M.D. Coolant System. Work Light. Manuals and Drawings. Spindle Stroke 5" Rapid Feed Rate (In/Out) 300 IPM Working Feed Rate 0 - 80 IPM Spindle Nose IS040 Condition: Good PRICE....................: ${please call for price}